A door that latches but the strike area looks chewed up is more common than many Burlington homeowners expect. Online repair forums and our own routes across Burlington, Oakville, Milton repeat the same story: the latch missed for months until screws pulled out of soft wood.
Strike damage we see near Appleby and Brant
Around Burlington, kick-ins and hip-checks chew the jamb at the strike — polish marks tell us whether the door dropped or the frame moved. Halton Door Repair Co. rebuilds the lock edge instead of chasing oversized screws in pulp.
Aldershot bungalow hinges need longer fasteners into framing when the trim is just decorative.
Repairs that survive the next season
Extended plates, composite filler where the wood is soft, and stud-length screws are the usual kit. Filing a lip is only for hairline misalignment — Halton Door Repair Co. says when that is a waste of your time.
After reinforcement we recheck latch height so Burlington winters do not recreate the miss.
Send photos before we roll
A clear shot of the strike and latch to (289) 210-7076 lets us load the right plate. Halton Door Repair Co. handles Halton Region stock doors the same day when sizes match.
Halton Door Repair Co. visit
Appleby, Brant, and Aldershot stops are mobile. Phone (289) 210-7076 for Burlington.
Common questions
Quick answers to what homeowners and property managers ask most about this problem.
What causes strike plate screws to pull out?
In Burlington, repeated latch misses wear away wood fibres around the screw holes. Each miss acts like a small impact. Short screws that only bite into trim — not the stud — pull out faster. Soft jamb wood from moisture or prior break-in damage makes the problem worse.
Can a split door jamb be repaired without replacing the door in Burlington?
In Burlington, yes, when the slab and hinges are still sound. We rebuild the lock edge with filler or wood inserts rated for hardware loads, reposition keeps, and use longer screws into the stud. Full replacement is reserved for frames that are twisted, rotted, or structurally compromised.
How do you fix a strike plate after a break-in?
In Burlington, first secure the opening. Then remove damaged wood at the lock edge, rebuild the section so screws bite cleanly, install a reinforcement plate if needed, and align the strike with the latch path. Hardware is replaced when the bore or bolt is damaged.
Are longer screws enough to fix a loose strike plate?
In Burlington, longer screws into the stud help only when the jamb wood around the plate is still solid. If the area is crushed or split, rebuilding the edge comes first — otherwise long screws pull through soft wood and the plate loosens again within weeks.
Need door repair in Burlington?
Halton Door Repair Co. serves Burlington, Oakville, Milton, Aldershot, and nearby Halton Region. Call (289) 210-7076 or request a quote with photos of the door — we will tell you honestly whether repair makes sense.